Buy Low Price From Here Now
The Cheetah Mounts APTMMB Tilt Wall Mount offers a 0-15 degrees of tilt while maintaining a slim 1.9" profile in the flat position. Weight capacity 160lbs supports hole patterns up to 28" (711mm) wide by 19" (483mm) tall. The universal design fits virtually any 32-55" plasma or LCD TV.
Readmore
Technical Details
- Universal Design Fits Most 32-55 inch TVs- Flush 1.9" Profile
- Tilt Range: 25° Downward
- Supports up to 165LBS
- 6" 3-Axis Magnetic Bubble Level Included
See more technical details
By T. Rodgers
PROS
- It has a solid, well built, frame. Sturdy powder coated metal that looks and feels of a better quality than the price makes you expect.
- Mounted right: There will be no fear that your TV will tumble.
- The price
CONS
- The bolts/screws appear to be provided somewhat at random. Mine was missing washers and the parts bag was actually ripped open before I opened the box. I had suitable replacements in the garage, or they could probably be purchased for $1 at a local hardware store...not a big deal, but it could be a nuisance.
- Instructions are comically bad. Not a big issue, because you really shouldn't need them.
CONCLUSION
At a discounted price - this is a good deal.
By Robert S. Tobias (Arlington, VA USA)
I was surprised at how easily this went together and how solid it is given the price. The frame is four pieces and once you put them together they are together. Once they are on the wall nothing is moving anyway.
To put it together and mount your TV you will want to use your own level if you have one, although this (Black & Decker BDL310S Projected Crossfire Auto Level Laser) is *much* better, and also a tape measure, socket set, pencil, and refreshing beverage for when you're done. That should be between 30 minutes and an hour from when you start. I was able to do everything myself and it's even easier if you have someone to help you hook the display to the frame.
If all you want to do is bolt your TV to your wall (and maybe tilt it down a bit) I can't see any reason to get something else.
By Jimbo (Texas)
Mine was shipped quickly, arrived undamaged with all the parts required and the free level. From unpack to turning on the TV took a couple hours, but much of that was gathering tools and measuring numerous times to ensure correct TV position.
Assembly instructions: It would have been better if they had provided detail about bolting the vertical struts to the cross members. The bolt holes in the struts are not identically positioned - is there a top and bottom? Does the inside angle of the 'L' face the inside or the outside? Does it matter? Maybe it doesn't matter, but a detailed picture of one of the corners would put the assembler at ease.
The package includes some nice lag bolts, a wall stud finder helps with placement, get those bolts into some studs and the frame will be going nowhere. The steel is plenty sturdy for the rated weight range. The package also included screws that fit my Samsung TV.
I suggest that people wanting the TV to be vertical adjust the tilt before hanging the TV, once it's on the wall there isn't much room to tighten the tilt clamps when you get near vertical.
Summary: Plenty sturdy, easy to to assemble, easy to install, and a fraction of the price of comparable units at the local electronics store. This one is a bargain!
By Javier L. Nevarez (San Francisco, CA)
I've never written a review on here but I had to for this product. It's the best $20 bucks I ever spent. It was easy to assemble and came with all the screws and even a level, although I trusted mine more after I tested them against each other. I hung a 54" panasonic from it with no problem. I was only able to use one stud but then used the two toggle bolts supplied and I hung from it for a few seconds to test it and it wasn't going anywhere. I weigh 155. The only thing I really had to adjust were the two screws with the little slip bar . When fully tightened they stuck straight out. Just loosen them and push them out turn them just a little and then retighten them and they work perfectly and lay flat. The mount is also much lower profile than I expected. You really have to sideline it to see the brackets. I was able to run the wires easily in the wall and my tv looks awesome up on the wall now. Seriously, why spend so much on these mounts. Paying over a hundred bucks is just a scam.
By Eric J. Green (texas, usa)
I had looked at the crap offered by the local wal-mart and target for over $100 (mounting a 55" LCD). This is a STURDY mount, simple to assemble, and straight-forward mounting instructions. I suppose that the people who have had an issue installing this mount must either be missing some parts (as I've seen posted) or just didn't take the time to READ the directions (looking at pictures is NOT reading). Really, if you can't manage to hang your flatpanel with this system, you SHOULD hire someone to do it! Shipment was very fast (4 business days to get to my house) and all parts WERE present in my unit.
as has been said before, i feel like I could hang off of this mount and it would easily support my 6'4, 250# frame!
Images Product
Buy Cheetah Mounts APTMM2B Tilt Wall Mount for 32"-55" Plasma and LCD TVs and Displays Now
No comments:
Post a Comment